XtraBond®9500SC - Hybrid Polyurethane Sealant

XtraBond® 9500SC is a high performance, one component, easy to apply surface coating. XtraBond® 9500SC is approved for moisture driven markets and the product has been specifically designed for the truck, trailer and container markets to assure a waterproof surface coat & patch.


  • Truck and Trailer Roof Patch Applications
  • Industrial Coating Applications
  • Vertical & Horizontal Joint Surfaces
  • Water Prevention in Container Use
  • Roof Repair Applications


  • Approved for Moisture & Damp Conditions
  • Fast Cure
  • High Strength Bond
  • Advance Formulation
  • No Solvants
  • No Shrinkage
  • Odorless


Exceeds the requirements of ASTM C 920, Type S, Grade NS, Class 25, Use NT, M, G and A

• Federal Specification TT-S-00230C, Type II, Class A
• CAN/CGSB-19 13-M87
• AAMA 808.3-92 Exterior Perimeter Sealing.

Technical Specs

Skin Time Less than 30 minutes @ 77 deg F/ 50% RH
Tack Free Time Less than 1 hour @ 77 deg F / 50% RH
Cure Rate 1/8” Bead per 24 Hrs
VOC 10 g/L (0.0751 lb/gal)
Elongation @ Break 150%
Hardness (shore A) 40 +- 5
Adhesion-n-Peel 36 pli
UV Rating No discoloration or change in appearance after 12 months of UV
Lap Shear 210 psi
Tensile Strength 175 psi
Staining None
Low Temp.  Flexibility Retained to -75 F degrees
High Temp. Flexibility Up to 400 F for short periods
Sag Self-leveling

Compliant with the following national, state and district VOC regulations:

US Environmental Protection Agency

California Air Resources Board SCM Districts

South Coast Air Quality Management District

Maricopa County, AZ

Northeast Ozone Transport Commission



This product is available in the following colors:

  • Aluminum Stone
  • Special colors upon request


The XB9500SC is available for the following industries


This product is available in the following configurations:

  • 1 gallon containers
  • 5 gallon pails
  • 55 gallon drums

Limited Lifetime Warranty

This product is guaranteed to give satisfactory performance if applied in accordance with the label directions. Liability to Premier Industrial Supply, Inc. (Premier) is limited to a full refund of the purchase price or product replacement if product is proven defective. Premier shall not be liable for loss or damage, whether direct, consequential or incidental. There are no other warranties expressed or implied including the implied warranty of merchantability or fitness for a particular purpose.