XtraBond®9500M - Hybrid Polyurethane Sealant

XtraBond® 9500M is a highly flexible, gun grade, advanced polymer mirror adhesive. Specially formulated for bonding large and small mirrors to substrates such as dry wall, wood & metals. It has excellent adhesion to all coated mirror backings including plate glass and acrylics. Xtrabond® 9500M has been designed with high flex, to address uneven walls.


  • Mirrors


  • High Flexibility
  • Absorbs wall movements
  • No Solvents
  • Wont dissolve Mirror silvering
  • No Odor
  • Non Sag
  • Green Friendly



Technical Specs

Skin Time Less than 15 minutes @ 77 degF/ 50% RH
Tack Free Time Less than 1 hour @ 77 degF / 50% RH
Cure Rate 1/4” Bead per 24 Hrs
VOC 9 g/L 0.0751 lb/gal
Elongation @ Break 1200%
Hardness (shore A) 25 +/- 5
Movement Capability 25%
Lap Shear 550 psi
Staining None
Low Temp.  Flexibility Retained to -90 degrees F.
High Temp. Flexibility Up to 425 degrees F for short periods
Sag None

Compliant with the following national, state and district VOC regulations:

US Environmental Protection Agency

California Air Resources Board SCM Districts

South Coast Air Quality Management District

Maricopa County, AZ

Northeast Ozone Transport Commission


This product is available in the following colors:

  • Flat white


The XB9500M is available for the following industries


This product is available in the following configurations:

  • 10.1 fl oz plastic fixed nozzle cartridges; 29 oz Quarts, 1 gallon pails, 5 gallon pails

Limited Lifetime Warranty

This product is guaranteed to give satisfactory performance if applied in accordance with the label directions. Liability to Premier Industrial Supply, Inc. (Premier) is limited to a full refund of the purchase price or product replacement if product is proven defective. Premier shall not be liable for loss or damage, whether direct, consequential or incidental. There are no other warranties expressed or implied including the implied warranty of merchantability or fitness for a particular purpose.